Stratus hardware and connections

By Landon McCoy · Updated September 10, 2026

Stratus has mono instrument input and output, a Multiknob, a footswitch, an LED strip, a 9V power input, and USB-C.

Connectors

ConnectionUse
INConnect your instrument or the preceding pedal.
OUTConnect an amp, mixer, audio interface, or headphone amplifier. This is a mono output, not a headphone jack.
9V DCUse center-negative 9V DC, at least 400mA, preferably isolated.
USB-CConnect for supported firmware updates, USB power, or MIDI through a USB host.
Stratus hardware diagram identifying the LED strip, Multiknob, footswitch, USB-C, 9V DC, and audio jacks.
Existing hardware reference from the Help Center Media library. Open image at full size.

Controls and LEDs

The Multiknob and footswitch change function with the selected mode. The LED strip shows startup, preset/effect selection, looping, tuning, and volume feedback. See Stratus modes and Multiknob controls.

Planning your rig

More visual references
Stratus rear and input-side view showing USB-C, 9V DC power, and instrument input.
USB-C and the 9V DC input are separate connections. Check the written power requirements before connecting. Open image at full size.
Still need a hand?

Email support@chaosaudio.com. We’re here to help.