Power Stratus and prevent power noise

By Landon McCoy · Updated October 3, 2026

Use a center-negative 9V DC supply rated for at least 400mA. An isolated power output is recommended.

Before connecting power

  • Check the voltage, DC marking, center-negative polarity, and current rating on the supply.
  • Use a dedicated isolated output. Avoid sharing a daisy-chain power lead with other pedals.
  • USB-C can power Stratus from a suitable USB power source, including the phone-style USB power bank demonstrated in the tutorial. Stratus has no internal battery. Keep the power source connected, and try isolated 9V power if USB introduces audio noise.
Check all three power requirements. 9V DC: Match the voltage. Center-negative: Match the polarity. 400mA or more: Use a suitable isolated output. A higher current rating is capacity; it does not change the required voltage.
A higher current rating is capacity; it does not change the required voltage. Open image at full size.

Startup

Connect power and wait for the blue/pink startup animation to finish; the tutorial allows about 10 seconds. Actual startup time can vary. The LEDs should then respond to the controls. The device can restore a saved playing mode, so its startup color alone is not a universal factory-mode guarantee.

If you hear hum or noise

  1. Turn down the listening volume. Try the recommended isolated 9V supply.
  2. Disconnect unnecessary USB connections and simplify the audio chain.
  3. Test the guitar and cables with the amp or interface directly, then add Stratus back.
  4. If noise remains, send support your power-supply label and a description of the complete rig.

Watch this task

From the Full Uncut Stratus Tutorial, recorded October 2, 2026. App screens and available controls can vary by version.

More visual references
Stratus rear and input-side view showing USB-C, 9V DC power, and instrument input.
USB-C and the 9V DC input are separate connections. Check the written power requirements before connecting. Open image at full size.
Stratus LED strip displaying its startup animation.
Existing startup demonstration. Wait for startup to finish before connecting or testing controls. Open image at full size.
Still need a hand?

Email support@chaosaudio.com. We’re here to help.

Related articles

Start here: get your first sound from StratusConnect your guitar, power Stratus, and check a basic sound before building your first effects chain.Stratus hardware and connectionsStratus has mono instrument input and output, a Multiknob, a footswitch, an LED strip, a 9V power input, and USB-C.Use headphones or record directly with StratusConnect Stratus OUT to an audio interface, mixer, or headphone amplifier. Stratus does not have a dedicated headphone output.Update Stratus firmwareUse the official Stratus Update Tool and a USB data cable. Keep Stratus connected and powered until the tool confirms completion.Stratus modes and Multiknob controlsChoose Preset, Stompbox (also called Live), or Looper for playing. Tuner temporarily mutes the output while you tune.